|
User #137288 1361 posts
Whirlpool Enthusiast
|
I read on a review website that the new X1950Pro has quite a long PCB and that it might not fit into some smaller cases.
I was looking at the Coolermaster Centurion 532. Does anyone know if there would be any issues in fitting that card into that case?
|
posted 2006-Dec-16, 8pm AEST
|
|
|
|
User #45574 5431 posts
Whirlpool Forums Addict
|
It will fix in a standard ATX size case just not a shuttle ect. You have no where near the problems with the GPU that Nvidia 8800GTX does 30cm's!
|
posted 2006-Dec-16, 9pm AEST
|
|
User #55714 1587 posts
Whirlpool Enthusiast
|
Its around 8 inchs long, i got 1 :P
|
posted 2006-Dec-16, 9pm AEST
|
|
User #30657 158 posts
Forum Regular
|
Also be careful about the height.
I have the powercolor and the bloody HSF just touches about the side of the case.
Must be nearly 5 cm extra in height on that puppy.
|
posted 2006-Dec-16, 9pm AEST
|
|
User #137288 1361 posts
Whirlpool Enthusiast
|
How would I know whether it fits... I mean Id have to buy one first.
They should have specific measurements on the box or something, to make it easier to judge.
|
posted 2006-Dec-16, 9pm AEST
|
|
User #55714 1587 posts
Whirlpool Enthusiast
|
Height of the Powercolor version is about 11-12 cm, due to the larger HSF, and about 25-26cm in length.
|
posted 2006-Dec-16, 9pm AEST
|
|
|
|
User #137288 1361 posts
Whirlpool Enthusiast
|
And width? Or is that more or less irrelevant?
|
posted 2006-Dec-16, 9pm AEST
|
|
User #55714 1587 posts
Whirlpool Enthusiast
|
The powercolor takes up 2 slots, so whatever underneath the PCI-E slot, would be unuseable.
|
posted 2006-Dec-16, 9pm AEST
|
|
User #24150 1725 posts
Whirlpool Enthusiast
|
i just installed one yesterday. i would say it overhangs off a stock atx motherboard by about an inch to a inch and a half.
|
posted 2006-Dec-17, 12am AEST
|