Whirlpool

Last night I had our TPG internet changed over to ADSL2+.
I tested the speeds and they were not up to scratch. Reading on other post i decided to try and update my firmware from the dlink website to adjust for the ADSL2.

My modem now appears to be dead. I am able to get power when plugged into the wall, but when i plug in the phone line, the status bar and ADSL confirmation light do not light up.

Is there anything I can do to fix this or have I created a brick to sit all my coasters on?

Thanks Guys

There are some notes here...
www.dlink.com.au/tech/Do...iletype=Firmware
...and you could use the V2.00B02.AU 20050914 EXE version firmware to recover by using 'corrupt mode' or whatever it's called.

Edit - above link is for Revision B hardware.
Below link is for Revision A hardware.
www.dlink.com.au/tech/Do...iletype=Firmware